Sold in Pairs. i2R CNC Packs Come with 2 Pairs.
The robust 5/16” T-bolt slides easily into the extruded table T-slots, and is long enough to capture nearly any material up to 3” thick. The aluminum clamping arm is 1-1/8” wide by 5-1/4” long, and is anodized to avoid marking of your materials. A large, knurled handle allows you to easily tighten to the desired pressure. Sold in pairs.
Struggling to secure parts on the bed of your new CNC router? You'll be amazed of the holding power of this exciting NEW accessory!
Details
Securing your workpiece to the bed of your CNC router often creates a challenge. The Axiom vacuum hold-down kit is a terrific accessory which makes securing your part a snap. Use just one pod to secure a small part, or all five pods to hold something large.
These compact Vacuum Pods are made from clear acrylic, each with it’s own vacuum seal. Each pod is connected together to cover a large area. Place the pods on your i2R/Axiom CNC table and secure with screws and T-nuts (included). Pods can be mounted either on top of your MDF spoil board or directly to the aluminum table by selecting the appropriate length screws. Cut the 1/4" hose to the desired length and connect the pods and valve to the vacuum port on the venturi. Use the remaining hose and fitting to connect your compressor to the air port on the venturi.
You'll be amazed of the holding power of this exciting NEW accessory!
Included:
• Vacuum Pods (5 pcs)
• On/off valve
• Venturi vacuum pump
• Mounting hardware
• End cap
• Hose (200")
• Air fitting
• Replacement gasket material
Note: requires 1.5CFM of compressed air at 90PSI
Work holding has always been a challenge for CNC operators. Here’s a terrific pair of clamps which offer speed, ease of use, and immense holding power.
Details
Work holding has always been a challenge for CNC operators. Here’s a terrific pair of clamps which offer speed, ease of use, and immense holding power.
This unique clamping kit includes two linear clamps, and two 12” aluminum fence rails. If you often machine multiple similar sized parts, this is the ideal clamping system, as it offers unmatched speed, paired with immense clamping power.
Each clamp offers durable, cast construction, and a long handle providing leverage for clamping. They rotate 360 degrees, and lock to the table via a large, knurled wheels.
The auto adjust feature allows you to pre-set the desired clamping pressure, which will remain consistent regardless of material placement. Each clamp, and each fence, includes both long and short T-bolts to allow use with, or without the spoil boards installed on your table.