Fastest Assembly Time in the Market. Start Cutting in less than 1 hour
LIFETIME US CUSTOMER SERVICE
We got you covered
PC CNC CONTROL
Our i2R CNC router series takes full advantage of the UCCNC software. Touch screen support.
Real time, 3d feedback during cuts. Control every aspect of your CNC machine from your computer.
I2RCNC E16 (4X4)
This line is designed for Professional users in mind and represents our most advanced development working with the UCCNC controller.*PC / laptop stand sold separately, PC not included.
All Exec 16 Packs ship directly to your shop for $999. Residential & lift-gate delivery services included.
*PC / LAPTOP STAND SOLD SEPARATELY, PC NOT INCLUDED.
I2RCNC E16 (4X4)
- X axis: 1220mm (48″) Nema 34 NM High Torque Steppers
- Y axis: 1220mm (48″) Nema 34 NM High Torque Steppers
- Z axis: 200mm (7.87″) Nema 23 2.5NM high torque steppers
TABLE WORK AREA::
- i2R Exec 16: (48″ x 48″)
- Spindle Speed : 0~24000rpm
- Standard: 2.2kW ER20 water cooled spindle as standard
- Optional: 2.2kW ER25 collet Italian Tekno air cooled spindle with ER25 collet system | please contact us
MAXIMUM FEED RATE:
- X-, Y-, and Z-Axis: 400 in./min - 1,081 in./min Stepper/Servo
We will provide test report upon completion ( Machine is tested until stall)
- 230v 1phase - main machine will run off a 13A single phase supply.
- Vacuum pump supply will be separate – see vacuum.
- Floor space requirement:
- Machine Weight: 1800 lbs
- Gantry Clearance (standard): 200mm clearance – & repositionable Z height
LINEAR MOTION COMPONENTS:
- HIWIN Profiled linear rail system size – a massive 20mm in X, Y, Z | 4 full carriages per axis
- Precision BallScrew X/Y/Z
- 50μm pitch error over 300mm and typical repeatability of 20um.
- BallScrew Diameter 16mm NOTE - 400W AC Servo Models will run 20mm ballscrews on X and Y Axes.
Exec 16: Two 16mm Ballscrew on Y Axis & One 16mm Ballscrew on X and Z
- Machine Base: All Welded Steel Frame
- All steel frame - 10mm steel laser cut - 80 x 40 steel box section with 5mm wall thickness. Precision machined on aerospace machining center before rail and ballscrew end condition assembly
- Gantry Bridge: 160x80mm heavy duty Maytech Alloy Bridge
- Gantry Supports: FEA designed webbed upstand construction
RESOLUTIONS & ACCURACY:
- Positional Accuracy +/- 0.02mm (.0007”)
- Repeatability <0.02mm
We perform a geometric accuracy test to each machine we produce
All of our measurements are made with Mitutoyo calibrated instruments
- High voltage stepper controller system with full UCCNC control.
- Tool Touch Off
- MDF Spoilboard
- Ethernet Cable
- VAC Table
- VAC Pump As standard 1 x 2.2kW side channel blower
- VAC Table upgrade to factory installed grid square suction table with access to the T-slots maintained every 3-400mms) | contact us
- 2.2kW ER25 collet Tekno air cooled spindle with ER25 collet system | contact us
AVAILABLE EXPANSION PORTS:
- Compatible with air solenoid for coolant
- Compatible with fixed touch off system
- Compatible with OPT laser system