Bits & Bits - 3 Pc Astra Coated Aluminum Bit Set

Bits & Bits - 3 Pc Astra Coated Aluminum Bit Set

$110.00

Astra Coated 3 Pc Aluminum Bit Set

Match this with any i2R Series CNC. This Bits & Bits set includes one of each Astra coated bit.

SRF43-250GP – .25″ Upcut Flat End 3Flute Bit. Square end center cutting 3 Flute End Mill for high speed milling on aluminum & wood and non-ferrous materials.
SRB43-250AM – .25″ 3 Flute ball nose. This tool features a 45 degree helix which makes it ideal for finishing due to its high shear angle and cutting aggressiveness. 3 Flute end mills are perfect for milling aluminum and other soft metals, they also tend to reduce vibrations during the milling operation.
425-VG45 45Degree V-Groove Bit – V-bits produce a “V” shaped pass and are used for engraving, particularly for engraving letters and making signs. The small angles and tips provided on these V-shaped engraving bits produce narrow cuts and small, delicate engraving of lettering and lines. Excellent for cutting: Aluminum, Plastic/Acrylic, Brass Wood

How does Bits & Bits’ Astra Coating extend the life of your bits?

During any type of cutting process, the cutting bit endures heat created by the friction and abrasion of the bit moving through the material. This friction and abrasion is a major cause of bit wear, resulting in the cutting edge dulling or deteriorating, causing burning, a rough finish and vibration.

Astra Coating is an applied multi-layered surface coating that lowers the friction coefficient of the bit, which allows the bit to cut smoother and faster while keeping friction heat down. This in turn will extend the life of the bit. Astra Coating is effective in wood, metals, aluminum, brass, and plastics, allowing faster speed and feed rates.

Made in USA by Bits&Bits

Bits & Bits - 4 Pc - Specialist Astra Coated Bit Set

Bits & Bits - 4 Pc - Specialist Astra Coated Bit Set

$130.00

4 Pc – Specialist Astra Coated Bit Set (Bits&Bits)

Match this with any i2R Series CNC. This set includes one of each bit. Great for a variety of cutting like foam, wood, aluminum, plastics, and cutting for 3D jobs with an extra long bit for hard to reach 3D toolpaths.

XL14-420C- 2″ Length of cut, Square coated Long Flute End Mill.
425-ST250- Foam Cutter Upcut spiral bit.
425-UP125- O flute Upcut for Aluminum & Plastics.
4TEB12-032-3FL- 1/32″ Tapered ball nose for 3D finishing.

How does Bits & Bits’ Astra Coating extend the life of your bits?

During any type of cutting process, the cutting bit endures heat created by the friction and abrasion of the bit moving through the material. This friction and abrasion is a major cause of bit wear, resulting in the cutting edge dulling or deteriorating, causing burning, a rough finish and vibration.

Astra Coating is an applied multi-layered surface coating that lowers the friction coefficient of the bit, which allows the bit to cut smoother and faster while keeping friction heat down. This in turn will extend the life of the bit. Astra Coating is effective in wood, metals, aluminum, brass, and plastics, allowing faster speed and feed rates.

Made in USA by Bits&Bits

Bits & Bits - 2 Pc - 3/8" Astra Compression Coated Bit Set

Bits & Bits - 2 Pc - 3/8" Astra Compression Coated Bit Set

$130.00

Astra Coated 3/8″ Spiral Compression & 3/8″ DownCut

Match this with any i2R B Series 2HP CNC. This set includes one of each Astra coated bit.

330-CM375 – 3/8″ Compression Bit (Milling Wood, HDU)
330-DNC375 – 3/8″ DownCut (Milling Wood)

3/8″ Spiral Compression Bit offers a strong bit with less material waste.
3/8″ Spiral Down-Cut bit offers sharp edges, perfect for shallow dadoes and grooves.

How does Bits & Bits’ Astra Coating extend the life of your bits?

During any type of cutting process, the cutting bit endures heat created by the friction and abrasion of the bit moving through the material. This friction and abrasion is a major cause of bit wear, resulting in the cutting edge dulling or deteriorating, causing burning, a rough finish and vibration.

Astra Coating is an applied multi-layered surface coating that lowers the friction coefficient of the bit, which allows the bit to cut smoother and faster while keeping friction heat down. This in turn will extend the life of the bit. Astra Coating is effective in wood, metals, aluminum, brass, and plastics, allowing faster speed and feed rates.

Made in USA by Bits&Bits

Amana - ABS207 - 3pc CNC Inlay Bit Set

$69.00

Amana 3PC CNC Inlay Bit Set

The Inlay Bit Set with 1/4" shank is designed for straight and V-Carve inlays and perfect for small decorative inlay work. This inlay set is compatible with every machine.
The 1/16” diameter straight plunge bit is essential for tight detailed corners and small recesses for straight inlays. The 1/8” straight plunge bit is ideal for creating pockets and removing waste materials. The 1/2" 90° V-Groove bit is used for V-Carving inlay machining.

I2R HEAVY DUTY STAND FOR EXECUTIVE 16 WHITE

$1,999.00

Full steel construcred stand that holds your CNC stable.

Allows for easy acess for ballscrew maintaince under the machine.

Give your machine portability if you need to move it out the way.

Can alos house your tool box giving you extra storage space and expansion!

Whiteside - RD1600 - CNC Down Cut Spiral - 1/4"SH, 1/8"CD, 1/2"CL

$19.50

Spiral bits provide a shear cutting edge that leaves a smoother cut than standard router bits. The down cut spiral design provides the best top surface edges, ejecting chips away from the router when routing through material.

This design also decreases the tendency to lift thin/small work pieces during CNC routing.

Specifications :

Shank	1/4"
Diameter	1/8"
Cut Length	1/2"
Overall Length	2"

Whiteside - 708 - 8pc CNC Engraving Bit Set

Whiteside - 708 - 8pc CNC Engraving Bit Set

$170.99

The Engraving Set is designed for small CNC hobbyists. This set contains eight 1/4" Engraving bits with an included angle ranging from 15° to 90°.

All types of projects will appear visually stunning with the many engraving options that exist from this one kit. Perfect for 2D and 3D Carving.

Bits include:

SC54 - 15° Engraving Bit with 1/16" flat

SC55 - 15° Engraving Bit with 45° point

SC70 - 30° Pencil Point Engraving Bit

SC71 - 30° Engraving Bit with 1/32" flat

SC75 - 45° Pencil Point Engraving Bit

SC76 - 45° Engraving Bit with 1/32" flat

1541 - 60° Vee Groove Bit

1500 - 90° Vee Groove Bit

All bits are 1/4" shank.

Whiteside - 703 - CNC 3pc Bit Set - Ball Nose

Whiteside - 703 - CNC 3pc Bit Set - Ball Nose

$89.99

The 703 Ball Nose Set is designed for small CNC machines. This group contains three 1/4″ shank bits consisting of two Ball Nose Spirals and one Conical Ball Nose Spiral. Great for CNC profiling.

Each bit is also sold individually as follows :

1/8″ Ball Nose Bit
3/16″ Ball Round Nose Bit
1/4″ Ball Round Nose Bit

Specifications

Shank: 1/4″
Ball Size: 1/8″, 3/16″ and 1/4″
Cut Length: 3/4″

Whiteside - UD2100 - CNC Up/Down Cut Spiral Router Bit 1/4" D X 1" CL 1/4" SH 2-1/2" OL

$36.00

Made from solid carbide, each bit contains up cut and down cut flutes. This flute design creates a compression cut that prevents fraying and splintering. Compression spirals will save you time and money on finishing your projects edges by reducing sanding time.

Whiteside - SC66 Conical Solid Carbide Spiral Ballnose CNC Router Bit 1/4"SH, 1/16"R, 7°ANGLE

Whiteside - SC66 Conical Solid Carbide Spiral Ballnose CNC Router Bit 1/4"SH, 1/16"R, 7°ANGLE

$48.00

Tapered ball nose CNC bits perform better by using a shearing action leaving smoother cuts in your project. Used for lettering, carving and any detailed projects.

Small, tapered tip allows for intricate details in your design. Four flutes cleanly rout out design for smooth, crisp edges.

Product Details

Whiteside Conical Ball Nose Spiral CNC Router Bit

Solid Carbide
Diameter: 1/8″
Cut Length: 7/8″
Shank: 1/4″
Overall Length: 2-1/2″
Flutes: 4
Radius: 1/16″
Angle: 7°

Whiteside - SC64 - Ballnose CNC Router Bit, 1/4"SH, 1/32"R, 11°ANGLE

Whiteside - SC64 - Ballnose CNC Router Bit, 1/4"SH, 1/32"R, 11°ANGLE

$48.00

Tapered ball nose CNC bits perform better by using a shearing action leaving smoother cuts in your project. Used for lettering, carving and any detailed projects.

Small, tapered tip allows for intricate details in your design. Four flutes cleanly rout out design for smooth, crisp edges.

Product Details

Whiteside Conical Ball Nose Spiral CNC Router Bit

Solid Carbide
Diameter: 1/16″
Cut Length: 3/4″
Shank: 1/4″
Overall Length: 2-1/2″
Flutes: 4
Radius: 1/32″
Angle: 11°

Whiteside - RU5200T - Up Cut Triple Flute Spiral - 1/2"SH, 1/2"CD, 2"CL

$68.00

Three flute design allows these bits to provide the best finish on your project. Up cut spiral design provides the best control with hand or table routing.

When creating design brings chips up and out of the cut.

Three fluted for super smooth cuts
Solid carbide

Stand Dimensions	34.25″ x 38.87″ x 29.5″
Stand Weight	142 lbs